Aluminium SealavacTM Vacuum Chamber Kit complete with a 3CFM Vacuum Pump - Ready to use
Heavy Duty Vacuum Chamber
SealavacTM Vacuum Chamber - A heavy duty Aluminium vacuum degassing chamber with a tough 20mm thick Acrylic lid.
The seal is moulded for the lid - no glue involved. The lid is supplied fully assembled. The Vacuum gauge and valve manifold are not thread tapped into the lid (this always makes a weak point with a risk of cross threading). Our vacuum chambers are designed to loose no more than 2.5inHg over a 24 hr period.
Quality Control: Prior to dispatch the Sealavac chambers are tested and held on vacuum (with the vacuum pump disconnected) for a minimum of 24Hrs. This allows us to check the integrity of the system. Aluminium Chamber
Custom made replacable seal - no glue
20mm thick Acrylic Lid
Valve manifold system
The 2 Stage, 3cfm vacuum pump: Capacity - 3 cfm Voltage - 220v/50Hz Free Air Displacement - 86Lpm Ultimate Vacuum - 15 microns, 2Pa Motor - 210ww Motor Speed - 1440rpm Oil Capacity - 420ml Dimensions - 350x143x265 mm The Kit Contents: 3CFM Vacuum Pump
11 Litre Aluminum Vacuum Chamber
Vacuum Pump Oil
Connection Hose, 7.6mm internal diameter
Note: We are a UK Ltd company. All equipment that we sell is supported in the UK.We can service, repair and supply spares for all of our vacuum pumps. All equipment is tested/checked before dispatch.