SEALAVAC Vacuum Chamber 12.2L, 3.2 US Gallon, Aluminium, 4.6CFM Single Stage Pump This 4.6CFM Vacuum pump will pull this 12.2L chamber to -29inHg (virtually full deflection on the gauge) in 2minutes 40 seconds SealavacTM Vacuum Chamber - A heavy duty Aluminium vacuum degassing chamber with a tough 20mm thick Acrylic lid.
FEATURE: The seal is moulded for the lid - no glue involved. The lid is supplied fully assembled. The Vacuum gauge and valve manifold are not thread tapped into the lid (this always makes a weak point with a risk of cross threading).
FEATURE: Our heavy duty vacuum chambers are designed to loose no more than 2.5inHg over a 24 hr period - NO HANDLES, NO RIVETS, NO LEAKS.
FEATURE: Quality Control: Prior to dispatch the Sealavac chambers are tested and held on vacuum (with the vacuum pump disconnected) for a minimum of 24Hrs. This allows us to check the integrity of the sy stem.
FEATURE: Metal,heavy duty, over sized valves for ease of handling and durability
Custom made replacable seal - no glue
Chamber Dimensions: 230mm High, 260mm Diameter
20mm thick Acrylic Lid
Valve manifold system
The 2 Stage, 4.6cfm vacuum pump:
Capacity - 4.6 cfm
Voltage - 220v/50Hz
Free Air Displacement - 45Lpm
Ultimate Vacuum - 45 microns, 6Pa
Motor - 290w
Motor Speed - 1440rpm
Oil Capacity - 260ml
Dimensions - 306x122x225 mm
The Kit Contents: 4.6CFM Single Stage Vacuum Pump
12.2 Litre Aluminum Vacuum Chamber
Vacuum Pump Oil
Note: We are a UK Ltd company. All equipment that we sell is supported in the UK.We can service, repair and supply spares for all of our vacuum pumps. All equipment is tested/checked before dispatch.