Product DescriptionSEALAVAC Vacuum Chamber 5.2L, 1.4 US Gallon, Aluminium, 3.8CFM Single Stage Pump This 3.8CFM Vacuum pump will pull this 5.2L chamber to -29inHg (virtually full deflection on the gauge) in under 2 minutes SealavacTM Vacuum Chamber - A heavy duty Aluminium vacuum degassing chamber with a tough 20mm thick Acrylic lid.
FEATURE: The seal is moulded for the lid - no glue involved. The lid is supplied fully assembled. The Vacuum gauge and valve manifold are not thread tapped into the lid (this always makes a weak point with a risk of cross threading).
FEATURE: Our heavy duty vacuum chambers are designed to loose no more than 1.4inHg over a 24 hr period - NO HANDLES, NO RIVETS, NO LEAKS.
FEATURE: Quality Control: Prior to dispatch the Sealavac chambers are tested and held on vacuum (with the vacuum pump disconnected) for a minimum of 24Hrs. This allows us to check the integrity of the sy stem.
FEATURE: Metal,heavy duty, over sized valves for ease of handling and durability
Custom made replacable seal - no glue
20mm thick Acrylic Lid
Valve manifold system
The 2 Stage, 3.8cfm vacuum pump:
Capacity - 3.8 cfm
Voltage - 220v/50Hz
Free Air Displacement - 45Lpm
Ultimate Vacuum - 45 microns, 6Pa
Motor - 290w
Motor Speed - 1440rpm
Oil Capacity - 260ml
Dimensions - 306x122x225 mm
The Kit Contents: 3.8CFM Single Stage Vacuum Pump
5.2 Litre Aluminum Vacuum Chamber
Vacuum Pump Oil
Note: We are a UK Ltd company. All equipment that we sell is supported in the UK.We can service, repair and supply spares for all of our vacuum pumps. All equipment is tested/checked before dispatch.
2 Reviews Hide Reviews Show Reviews
what a bit of kit. reaches the minus in seconds, leaving plenty of time to work with the resin. great product.so happy with this.
This was a really good product and worked perfect. Never used a chamber before so was a little apprehensive but the instructions were really simple to follow and the set up was quick and easy.