SEALAVAC Vacuum Chamber 9.55L, 2.5 US Gallon, Aluminium, 3.8CFM Single Stage Pump This 3.8CFM Vacuum pump will pull this 9.55L chamber to -29inHg (virtually full deflection on the gauge) in 2minutes 40 seconds Sealavac Vacuum Chamber - A heavy duty Aluminium vacuum degassing chamber with a tough 20mm thick Acrylic lid.
FEATURE: The seal is moulded for the lid - no glue involved. The lid is supplied fully assembled. The Vacuum gauge and valve manifold are not thread tapped into the lid (this always makes a weak point with a risk of cross threading).
FEATURE: Metal, heavy duty, over sized valves for ease of handling and durability
Aluminium Chamber - 250mm diameter x 180mm High
Custom made replaceable seal - no glue
20mm thick Acrylic Lid
Valve manifold system
The single Stage, 3.8cfm vacuum pump:
Capacity - 3.8 cfm
Voltage - 220v/50Hz
Free Air Displacement - 45Lpm
Ultimate Vacuum - 45 microns, 6Pa
Motor - 290w
Motor Speed - 1440rpm
Oil Capacity - 260ml
Dimensions - 306x122x225 mm
The Kit Contents: 3.8CFM Single Stage Vacuum Pump
9.55 Litre Aluminium Vacuum Chamber
Vacuum Pump Oil
Note: We are a UK Ltd company. All equipment that we sell is supported in the UK. We can service, repair and supply spares for all of our vacuum pumps. All equipment is tested/checked before dispatch.
5 Reviews Hide Reviews Show Reviews
I use it to degassing silicone rubber (SH. 20A-40A) and this pump is perfect for the job.
Great value and high quality product. Works pretty much straight out of the box. A wee funnel for the oil would be a great addition, but nonetheless very good for the money.
Bought this system for stabilising wood. Had looked at a few cheaper systems but was not confident in quality. Liked the idea of this because it is a UK manufacturer and I could get replacement components if required. The whole thing is very well made and worked perfectly. Chamber holds the vacuum well so no need to keep pump running once the vacuum is made - I often leave the vacuum in place over night for wood stabilisation. Only very slight issue was the base of the chamber had a high spot at the centre so it 'rolled around' slightly. I stuck some plastic dots on the bottom (self adhesive and cost about 50p) and it is now perfectly stable and non-slip. Chamber is very well made and the seal is excellent.
I bought it to degas silicone and this pump is perfect to make good quality moulds.
This is why I buy British, Customer service was flawless and all my questions were answered courtiously, Kit arrived on time and I'm pleased to say is working perfectly for my knife scales,Highly recommend